Correct answer Carries: 4.
Wrong Answer Carries: -1.
A \( 212.1 \, \text{V} \) (peak) AC source is connected to a \( 75 \, \Omega \) resistor. What is the average power consumed?
RMS voltage: \( V = \frac{v_m}{\sqrt{2}} = \frac{212.1}{1.414} = 150 \, \text{V} \).
RMS current: \( I = \frac{V}{R} = \frac{150}{75} = 2 \, \text{A} \).
Average power: \( P = I^2 R = 2^2 \times 75 = 300 \, \text{W} \).
A \( 45 \, \Omega \) resistor and \( 18 \, \mu\text{F} \) capacitor are in series with a \( 220 \, \text{V} \), \( 50 \, \text{Hz} \) source. What is the impedance?
\( X_C = \frac{1}{\omega C} = \frac{1}{314 \times 18 \times 10^{-6}} \approx 176.8 \, \Omega \).
\( Z = \sqrt{R^2 + X_C^2} = \sqrt{45^2 + 176.8^2} = \sqrt{2026 + 31258.24} \approx 182.4 \, \Omega \).
In an AC circuit with only a resistor, what is the value of the power factor?
In a purely resistive AC circuit, the voltage and current are in phase (phase angle \( \phi = 0^\circ \)). The power factor is defined as \( \cos \phi \), so \( \cos 0^\circ = 1 \), indicating maximum power transfer.
A series LCR circuit with \( R = 70 \, \Omega \), \( X_L = 90 \, \Omega \), \( X_C = 40 \, \Omega \) has a \( 210 \, \text{V} \) (rms) source. What is the power dissipated?
\( Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{70^2 + (90 - 40)^2} = \sqrt{4900 + 2500} = \sqrt{7400} \approx 86 \, \Omega \).
RMS current: \( I = \frac{V}{Z} = \frac{210}{86} \approx 2.442 \, \text{A} \).
Power: \( P = I^2 R = (2.442)^2 \times 70 \approx 417.6 \, \text{W} \).
In an AC circuit with a resistor and capacitor in series, why can the sum of individual voltages exceed the source voltage?
In an RC series circuit, the voltages across the resistor and capacitor are 90° out of phase. The algebraic sum of their magnitudes can exceed the source voltage, but the source voltage is the vector sum (\( V = \sqrt{V_R^2 + V_C^2} \)), accounting for the phase difference.
A \( 80 \, \Omega \) resistor and \( 25 \, \mu\text{F} \) capacitor are in series with a \( 220 \, \text{V} \), \( 50 \, \text{Hz} \) source. What is the impedance?
\( X_C = \frac{1}{\omega C} = \frac{1}{314 \times 25 \times 10^{-6}} \approx 127.4 \, \Omega \).
\( Z = \sqrt{R^2 + X_C^2} = \sqrt{80^2 + 127.4^2} = \sqrt{6400 + 16230.76} \approx 150.5 \, \Omega \).
A \( 25 \, \Omega \) resistor is connected to a \( 125 \, \text{V} \) (rms) AC source. What is the rms current?
RMS current: \( I = \frac{V}{R} \).
Given: \( V = 125 \, \text{V} \), \( R = 25 \, \Omega \).
\( I = \frac{125}{25} = 5 \, \text{A} \).
A \( 141.4 \, \text{V} \) (peak) AC source is connected to a \( 50 \, \Omega \) resistor. What is the average power consumed?
RMS voltage: \( V = \frac{v_m}{\sqrt{2}} = \frac{141.4}{1.414} = 100 \, \text{V} \).
RMS current: \( I = \frac{V}{R} = \frac{100}{50} = 2 \, \text{A} \).
Average power: \( P = I^2 R = 2^2 \times 50 = 200 \, \text{W} \).
A light bulb rated at \( 100 \, \text{W} \) operates on a \( 220 \, \text{V} \) (rms) AC supply. What is the peak voltage across the bulb?
Peak voltage: \( v_m = \sqrt{2} V \).
Given: \( V = 220 \, \text{V} \) (rms).
\( v_m = 1.414 \times 220 = 311.08 \, \text{V} \approx 311 \, \text{V} \).
In an AC circuit with a capacitor and resistor in series, how does the phase difference between voltage and current change if the capacitance is increased?
In an RC series circuit, the phase angle \( \phi = \tan^{-1} \left( \frac{X_C}{R} \right) \), where \( X_C = \frac{1}{\omega C} \). Increasing capacitance decreases \( X_C \), reducing the phase angle, meaning the current leads the voltage by a smaller angle.
Are you sure you want to submit your answers?