Correct answer Carries: 4.
Wrong Answer Carries: -1.
Two cells of emf \( 3 \, \text{V} \) and \( 7 \, \text{V} \) with internal resistances \( 0.5 \, \Omega \) and \( 1.5 \, \Omega \) are connected in series with a \( 10 \, \Omega \) resistor. What is the current through the circuit?
Equivalent emf: \( \varepsilon_{\text{eq}} = 3 + 7 = 10 \, \text{V} \).
Total resistance: \( R_{\text{total}} = 0.5 + 1.5 + 10 = 12 \, \Omega \).
Current: \( I = \frac{\varepsilon_{\text{eq}}}{R_{\text{total}}} = \frac{10}{12} \approx 0.83 \, \text{A} \).
In a circuit with resistors in series, why does the current remain the same through each resistor?
In series, there’s only one path for current. Kirchhoff’s junction rule ensures charge conservation, so the same current flows through each resistor as no charge accumulates.
What ensures that the total current entering a junction equals the total current leaving it in a complex circuit?
Kirchhoff’s junction rule, based on charge conservation, ensures that charge does not accumulate at a junction in steady state, so the sum of currents in equals the sum out.
Why does the resistance of a conductor increase when it is stretched to double its length, assuming volume remains constant?
Resistance \( R = \rho l / A \). Doubling length (\( l' = 2l \)) halves area (\( A' = A/2 \)) due to constant volume. Thus, \( R' = \rho (2l) / (A/2) = 4 \rho l / A = 4R \), due to both increased length and decreased cross-sectional area.
A Wheatstone bridge with \( R_1 = 8 \, \Omega \), \( R_2 = 16 \, \Omega \), \( R_3 = 12 \, \Omega \), \( R_4 = 24 \, \Omega \) has a \( 10 \, \text{V} \) battery across AC and a galvanometer (\( 5 \, \Omega \)) across BD. What is the current through the galvanometer?
Check balance: \( \frac{R_1}{R_2} = \frac{8}{16} = 0.5 \), \( \frac{R_3}{R_4} = \frac{12}{24} = 0.5 \). Bridge is balanced.
Since balanced, \( I_g = 0 \, \text{A} \).
A conductor has a resistivity of \( 7 \times 10^{-8} \, \Omega \text{m} \) and \( \alpha = 4 \times 10^{-3} \, ^\circ\text{C}^{-1} \) at \( 25^\circ \text{C} \). What is its resistivity at \( 85^\circ \text{C} \)?
Use: \( \rho_t = \rho_0 [1 + \alpha (T - T_0)] \).
Substitute: \( \rho_t = 7 \times 10^{-8} [1 + 4 \times 10^{-3} (85 - 25)] \).
Calculate: \( \rho_t = 7 \times 10^{-8} [1 + 0.24] = 7 \times 10^{-8} \times 1.24 = 8.68 \times 10^{-8} \, \Omega \text{m} \).
A copper wire of cross-sectional area \( 2.5 \times 10^{-7} \, \text{m}^2 \) carries a current of \( 0.85 \, \text{A} \). If \( n = 8.5 \times 10^{28} \, \text{m}^{-3} \) and \( e = 1.6 \times 10^{-19} \, \text{C} \), what is the drift speed?
Drift speed: \( v_d = \frac{I}{n e A} \).
Substitute: \( v_d = \frac{0.85}{8.5 \times 10^{28} \times 1.6 \times 10^{-19} \times 2.5 \times 10^{-7}} \).
Calculate: \( v_d = \frac{0.85}{3.4 \times 10^3} \approx 2.5 \times 10^{-4} \, \text{m/s} \).
In a circuit with multiple loops, what does Kirchhoff’s junction rule imply about the currents at a node?
Kirchhoff’s junction rule states that the sum of currents entering a node equals the sum leaving it, ensuring charge conservation, as charge cannot accumulate at a point in a steady-state circuit.
In a battery-powered circuit, if the external load resistance becomes very large, what happens to the current drawn from the battery?
Current \( I = \varepsilon / (R + r) \). As external resistance \( R \) becomes very large, \( R + r \approx R \), so \( I \approx \varepsilon / R \), approaching zero as \( R \to \infty \).
A \( 10 \, \text{V} \) battery with \( 2 \, \Omega \) internal resistance delivers a current of \( 2 \, \text{A} \) to a resistor. What is the resistance of the resistor?
Terminal voltage: \( V = \varepsilon - I r = 10 - 2 \times 2 = 6 \, \text{V} \).
Resistance: \( R = \frac{V}{I} = \frac{6}{2} = 3 \, \Omega \).
Are you sure you want to submit your answers?